Nowadays, there are so many products of 6 hp long shaft in the market and you are wondering to choose a best one.You have searched for 6 hp long shaft in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 6 hp long shaft which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
818 reviews analysed
1. Wadoy 3/4" to 1" Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator
- This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch.
- Alters motors with a different diameter shaft and alters pulleys for a different speed or belt.
- Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements.
- Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc.
- One adapter and step key included
- Made from cold rolled steel, precision machined and tumbled, high durability.
2. Annovi Reverberi Pressure Washer Replacement Pump, 2.5 Max GPM, 3000 PSI, RMV25G30-EZ-PKG, Easy Start Package
3. Briggs and Stratton 13R232-0001-F1 Engine
- Dura-bore cast iron cylinder sleeve for extended life
- Maintenance-free Magnetron electronic ignition for quick, dependable starts
- Overhead valve design (OHV) for cooler operation and longer valve life
- Dual ball bearing
- Dual-clean air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life
This genuine 208cc Briggs & Stratton single cylinder engine offers dependable power for your equipment needs. With a power rating of 9.50 gross torque, this engine features a premium dual clean air filtration system and maintenance-free Magnetron electronic ignition. With a manufacturer limited warranty of 2 years consumer use / 90 days commercial use, Briggs & Stratton provides power that you can trust. This engine includes a Dura-Bore cast iron cylinder sleeve for extended life. This engine includes an installed muffler. This engine includes a fuel tank.
4. Hangkai 4-Stroke 6.5 Horsepower Water-Cooled Outboard, Hangkai Outboard Motor Stroke Boat Engine Water Cooled Shaft Fish Cooling Control Us Marine Fishing Water-Cooling Machine Water-Cooled Till
- ☀USA STOCK! FREE SHIPPING!
- ☀About Outboard certification We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
- ☀Hangkai 4-stroke 6.5 horsepower water-cooled outboard Don’t do the following will avoid cylinder Scoring 1，start the motor on bank 2, use the motor when it stop coming out of water Even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
- ☀Hangkai 4-stroke 6.5 horsepower water-cooled outboard Feature Universal motors, high performance, reliable quality Perfect match inflatable boats, fishing boats, sailboats, and small yachts. Economical and compact structure. Durable, lightweight and anti-corrosive construction. Maneuverable and safe twist grip throttle control.
- ☀WARRANTY: 100% Money Back Guarantee for worry-free purchasing. If you have any questions, please feel free to contact us, LOYALHEARTDY19 will spare no effort to help you.
❤Our LOYALHEARTDY19’s Hangkai 4-stroke 6.5 horsepower water-cooled outboard are all issued from the United States. We can ship for free. We use the best quality and fastest logistics companies – UPS Logistics and FEDEX Logistics to help with transportation. You only need 2-7 days to receive the package.
❤If you have any problems with the package you received, please feel free to contact us. We will provide you with quick and effective help and compensation in the first time. We assure you that you choice us is very correct. Because We will never let you have any loss and give you a nice shopping experience.
❤ In addition, your order has the protection provided by Amazon. You can get 100% protection.
6.5HP Outboard Boat Motor Engine 4-Stroke Updated with Water Cooling System
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don’t do the following will avoid cylinder Scoring:
1，start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
Notice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period（10hours）.After run-in period , you need to replace the gear oil second time after 100 hours running . (if you do not know how to handle this, please contact with us )
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
5. A1403, 1/6HP 825RPM Condenser Fan Motor
- 1/6 HP AC Condenser Fan Motor, 1-speed at 825 RPM, 208~230V, 1.0 AMP
- Capacitor (not included): 5 MFD/370V
- Replaces: AOS Century FSE1018SF, Emerson: 1873, MARS 10403, Fasco D798, GE/Genteq 3403, Packard 60825, Rheem Protech 51-23055-12, Marathon X465
- Features: All Angle, ball bearing Rheem mounting holes w/screws installed Water slinger on shaft Thru-bolt or band mounting Capacitor requirement noted on motor label Double full flatted shaft Specifications: Class B insulation Single phase, 60 hertz Thermal overload protected Fan duty, continuous, air over Totally enclosed non-ventilated 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
6. Lennox Corporation 65G60 208-230V/1 1/6HP 825RPM MOTOR
7. Sierra 18-7350 Fuel Pump, Mallory, Johnson / Evinrude Outboards
- Designed for use with Johnson/Evinrude 6, 8, 9.9, and 15 HP engines from 1981 to 1998
- Interchangeable with EMP 1399-07350, Johnson/Evinrude 391638, 395091, 397274, 397839, and Mallory 9-35350
- Includes one fuel pump per package
- Each Sierra product meets or exceeds the original equipment part it replaces
Sierra’s 18-7350 Fuel Pump is designed for use with Johnson/Evinrude 6, 8, 9.9, and 15 HP engines from 1981 to 1998. It is interchangeable with EMP 1399-07350, Johnson/Evinrude 391638, 395091, 397274, 397839, and Mallory 9-35350. Each Sierra product meets or exceeds the original equipment part it replaces.
8. Neiko 10043A Phillips and Flathead Screwdriver Power Driver Bit Set, 5 Piece | 12" Extra Long Length | 1/4" Shank
- Set of five 12-inch screwdriver bits that includes: three Phillips (PH# 1, 2, 3) and two slotted (flat head 3/16 and ¼-inch) bits
- Made from hardened, heat treated chrome vanadium steel for increased durability and long service life
- Twelve inch extra long screwdriver bits give you added length to work with hard-to-reach screws
- Quarter inch hex shank allows bits to be mounted on a power drill or die grinder and shank shape prevents slippage and loss of torque
- Includes durable plastic pouch for carrying and storage that easily hangs on a tool bench
12-inch Super Long Phillips and Slotted Screwdriver Bit Set, 5-Piece. Phillips: #1, 2, 3 and Slotted: 3/16″ & 1/4″.
9. ATD Tools 10325 Aluminum Heavy-Duty Platform
Perfect for getting that extra reach when working on or washing trucks, vans, SUVs and RVs. 19-1/2″ tall. Holds up to 330 pounds. Non-slip platform area measures 30-3/4″ x 11-3/4″. Lightweight, space saving design folds away for easy storage. Construction: 6063 aluminum alloy. Hinges: Steel with safety locks for solid and stable work platform. Certification: EN131 for 330 pounds.
10. Performance Tool W924 Long Shaft Screwdriver Set, 3-Piece
Performance Tool W924 3-piece Long Shaft Screwdriver Set features 22 1/2 inch overall length for hard to reach areas. Hi-visibility pro style handles. Chrome plated steel shafts with magnetic tips. Phillips sizes: #2 x 22 1/2″ and #3 x 22 1/2″. Slotted sizes: 1/4 x 22 1/2″.
By our suggestions above, we hope that you can found 6 Hp Long Shaft for you.Please don’t forget to share your experience by comment in this post. Thank you!