Top 9 65 Hp Torque Converter

0

Nowadays, there are so many products of 6.5 hp torque converter in the market and you are wondering to choose a best one.You have searched for 6.5 hp torque converter in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings 6.5 hp torque converter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

943 reviews analysed

1. MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

Feature

Description

TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability:
compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan

This is a quality after market reproduction of the Comet made TAV2 Torque converter kit. Designed to be used on go-karts, mini-bikes and wake wrenches with engine sizes 3hp to 7hp. This is a must on live axle go-karts especially those with rear tires larger than 16" tall. A centrifugal clutch will not pull or hold up to these demands. For your convenience this kit comes with both sprockets, a #35 chain 12 tooth sprocket and the #41/40/420 chain with the #10 tooth sprocket.

Specifications:
Large Pulley Driven unit: Dia. 157mm or 6"
Driver clutch bore: 3/4"
Top width: 19mm(3/4")
Sprocket teeth: 10 tooth for #40/41 chain and 12 tooth for #35 chain
Engagement range: 2350-200 RPM
Recommended engine: 2HP – 7HP engines, 3/4"shaft with flat key

Fits all engines with a 3/4" Straight Crankshaft.

This Kit Includes:
1 x Drive Belt
1 x Plastic Cover
1 x 3/4" Driver Pulley
1 x 5/8" Driven Pulley (6" Diameter)
1 x Aluminum Mounting Plate
1 x 10 Tooth Sprocket for #40 #41 Chain
1 x 12 Tooth Sprocket for #35 Chain
1 x Mounting Hardware Kit

This kit has everything you will need!!
Please see pictures for all that is included.

2. GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4" OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES

GO KART TORQUE CONVERTER for PREDATOR ENGINE, 6.5 HP 212CC 3/4" OHV HORIZONTAL SHAFT, ENGINE CLUTCH.75 inch, Replaces Comet TAV2 218353A, 12t 35 and 10T 40 or 41 ✮ By BULLET LINES

Feature

Description

This auction is for 1 brand new complete 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine Torque Converter with all hardware necessary to mount.

Important Note: Included is the unique engine bolt kit for predator engines and the correct anti vibration pilot washer. Predator engines have a shoulder at the crank that is off by which cause the driver to rub on the back plate and misalignment of the belt; We provide extra piece of hardware to fix the problem. (no other kit on the market provides everything needed to fit a 212cc predator engine).

This kit comes with either a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Bullet Lines torque converter is an asymmetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments. 

Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.

Engine compatability:  Predator 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine.

Specifications:

  • Driven unit: Diameter 6″ (157mm) with 5/8″ bore
  • Drive clutch bore: 19mm (3/4″)
  • Belt: Asymmetrical type
  • Belt Top width: 19mm(3/4″)
  • Sprocket teeth: 10 teeth or 12 teeth
  • Engagement range: 2350±200 RPM
  • Recommended engine: 5.5HP – 9HP engine,
  • 3/4″shaft with flat key
  • 3. MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore 10T #40/41/420 China (Complete 3/4" Torque Converter Set)

    MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore 10T #40/41/420 China (Complete 3/4" Torque Converter Set)

    Feature

    Description

    TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
    Engine compatability: compatible on most engine with horizontal shaft.
    Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan

    Specifications:

    Driver Clutch Bore: 3/4"
    Driven Clutch Bore: 16mm
    Driven Clutch Dia: 157mm or 6"
    Sprocket: 10 teeth for #40/41/420 chain
    Belt: Asymmetrical type
    Belt Top Width: 19mm(3/4")
    Engagement Speed: 2200±200 RPM
    Recommended Engine: 2HP – 8HP engines, 3/4" shaft with flat key

    Fits all engines with a 3/4" Straight Crankshaft.

    This Kit Includes:
    1x Drive belt
    1x Driver pulley
    1x Driven pulley 16mm bore 6" diameter
    1x Plastic cover
    1x Full mounting hardware kit
    1x 10 Teeth sprocket for #40/41/420 chain(chain not included)
    1x Aluminum mounting backplate

    This kit has everything you will need!!
    Please see pictures for all that is included.

    4. MOOSUN 30 Series Torque Converter Driver Clutch 3/4" Bore Go Kart for Comet 219552 5957

    MOOSUN 30 Series Torque Converter Driver Clutch 3/4" Bore Go Kart for Comet 219552 5957

    Feature

    Description

    This is a brand new aftermarket asymmetrical 30 series complete driver clutch with 3/4" ID hole,Widely used on go karts, bikes, lawn mowers and any more with 3/4" shaft.

    Specifications:
    1. Material: Iron
    2. Replace: Manco 5957, Comet 203814 / 219552 / 219457, Yerf Dog Q43201W
    3. Centrifugal Clutch: 3/4" Bore
    4. Drive clutch bore:3/4 inches (19.05mm)
    5. Key way:3/16"
    6. Belt: Asymmetrical belt
    7. Recommended engine:2HP-8HP
    8. Fits engines with 3/4" shaft
    9. 30 Series Torque Converter Driver Clutch, 6" diameter with 3/4" Bore
    10. Uses a 3/4" Asymetrical Belt (Not Included)
    11. Easy to install

    Attention:
    1. Torque converter drive pulley must be bolted tightly to the engine crankshaft. Recommended engine power 3hp to 8hp.
    2. 2 1/2° angle (flat side) of belt must be against the 2 1/2° angle pulley flange(Next to engine).

    5. Bullet Lines Torque Converter Go Kart Clutch, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, Small Engine Belt Drive, 3/4" 218353A, (0.75" 10T 40/41)

    Bullet Lines Torque Converter Go Kart Clutch, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, Small Engine Belt Drive, 3/4" 218353A, (0.75" 10T 40/41)

    Feature

    Description

    Bullet Lines .75″ torque converter replaces Comet TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts

    Bullet Lines 3/4″ go kart clutch is an asymetrical inline small engine clutch that replaces Comet TAV2 30 – 75 Torq A Verters. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission, allowing higher speeds of your small engine, and smoother acceleration.Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches.

    This torque converter fits a 0.75″ shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2 HP – 7 HP

    Model 1: 1″ Bore, 35 Chain, 12 Tooth
    Model 2: 1″ Bore, 40/41 Chain, 10 Tooth

    Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.

  • Briggs
  • Robin
  • Tecumseh
  • Honda (and clones)
  • Kohler
  • Clinton
  • Lifan

    Specifications:

  • Large Pulley Driven unit: Dia. 157mm or 6″
  • Driver clutch bore: 3/4″
  • Belt: Asymmetrical type
  • Top width: 19mm(3/4″)
  • Sprocket teeth: 10 tooth for #40/41 chain
  • Engagement range: 2350±200 RPM
  • Recommended engine: 2HP – 7HP engines, 3/4″shaft with flat key

    The Torque Converter assembly includes:

  • Driver Unit:1set
  • Driven Unit:1set
  • V-Belt:1pc
  • Driven Shaft & Gear:1set
  • Side Retainer Plate:1pc
  • Torque Converter Cover:1pc
  • Instructions

    All respective trademarks and registered trademarks appearing on this description belong to their respective owners

  • 6. MOOSUN Torque Converter Go Kart Clutch Set 3/4 inch 12T #35 Chain Replace for Manco Comet TAV2 Mini Bike

    MOOSUN Torque Converter Go Kart Clutch Set 3/4 inch 12T #35 Chain Replace for Manco Comet TAV2 Mini Bike

    Feature

    Description

    TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
    Engine compatability: compatible on most engine with horizontal shaft.
    Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan

    Specifications:

    Driver Clutch Bore: 3/4"
    Driven Clutch Bore: 16mm
    Driven Clutch Dia: 157mm or 6"
    Sprocket: 12 teeth for #35 chain
    Belt: Asymmetrical type
    Belt Top Width: 19mm(3/4")
    Engagement Speed: 2200±200 RPM
    Recommended Engine: 2HP – 8HP engines, 3/4" shaft with flat key

    Fits all engines with a 3/4" Straight Crankshaft.

    This Kit Includes:
    1x Drive belt
    1x Driver pulley
    1x Driven pulley 16mm bore 6" diameter
    1x Plastic cover
    1x Full mounting hardware kit
    1x 12 Teeth sprocket for #35 chain(chain not included)
    1x Aluminum mounting backplate

    This kit has everything you will need!!
    Please see pictures for all that is included.

    7. SUNROAD Go Kart Engine Torque Converter Clutch Replacement kit for Comet Manco 3/4" 10T #40 #41 Chain

    SUNROAD Go Kart Engine Torque Converter Clutch Replacement kit for Comet Manco 3/4" 10T #40 #41 Chain

    Feature

    Description

    Introductions:
    Welcome to our site! We are glad to give you a recommendation of this Go Kart Torque Converter Kit 3/4 10T 40/41/420. This kit is made of high quality iron and aluminum, which is sturdy and durable. It fits all engines with a 3/4 inch straight crankshaft and it’s suitable for Go Karts 30 series. With its high quality and fine workmanship, we believe that it won’t let you down. So don’t hesitate, just have a try!

    Features:
    1. Made of high quality iron and aluminum, sturdy and durable 2. Fit all engines with a 3/4 inch straight crankshaft 3. Suitable for Go Karts 30 series 4. High quality and fine workmanship 5. Easy to use

    Specifications:
    1. Material: Iron & Aluminum
    2. Package Dimensions: (13.78 x 13.78 x 7.48)” / (35 x 35 x 19)cm (L x W x H)
    3. Weight: 11.24 lbs / 5.1 kg
    4. Fits: All engines with a 3/4 inch straight crankshaft
    5. 1 Sprocket Includes: 1 x 10 Tooth Sprocket for #40/41 Chain (Chain not included)
    6. Fitment: Go Karts 30 Series

    Package Includes:
    1 x Go Kart Torque Converter Kit (Chain not included)

    8. Torque Converter Go Kart Clutch Set 3/4" Compatible for Manco Comet TAV2 10T 40/41 and 12T 35 Chain Drive Belt

    Torque Converter Go Kart Clutch Set 3/4" Compatible for Manco Comet TAV2 10T 40/41 and 12T 35 Chain Drive Belt

    Feature

    Description

    Ameetaa’s go kart torque converter clutch is a replacement kits Compatible for the Comet TAV2 go-kart 30 series. This kit comes with jackshaft sprockets for the 12T #35 or 10T #40 #41 #420 chain. It is made of high quality iron and aluminum, which is sturdy and durable.With this clutch,it can help you get more power out of your small engine by reducing engine load and allows higher speeds out of your small engine,smoother acceleration.

    Specifications:
    – Material: Iron & Aluminum
    – Package Dimensions: (13.78 x 13.78 x 7.48)” / (35 x 35 x 19)cm (L x W x H)
    – Weight: 11.24 lbs / 5.1 kg
    – Fits: All engines with a 3/4 inch straight crankshaft
    – Fitment: Go Karts 30 Series
    – Replacement:Comet, Predator, Manco and more
    – Front Drive Clutch Bore: 3/4″(19mm)
    – Rear Drive Clutch Bore: Overall Diameter 6″ (5/8″ driven pulley)
    – 2 Sprockets Includes: 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain (Chain not included)

    Package Includes:
    1 x Drive belt
    1 x 3/4″ Driver pulley
    1 x 5/8″ Driven pulley 6″ diameter
    1 x Plastic Assy Cover
    1 x Full Mounting hardware Kit
    1 x 10 Tooth Sprocket for #40 #41 #420 chain (Chain not included)
    1 x 12 Tooth Sprocket for #35 Chain (Chain not included)
    1 x Aluminum Mounting Bracket Plate

    9. Torque Converter Go Kart Clutch Replacement Kit For Manco Comet TAV2 3/4" 10T #40/41 and 12T #35 Chain (Chain not included)

    Torque Converter Go Kart Clutch Replacement Kit For Manco Comet TAV2 3/4" 10T #40/41 and 12T #35 Chain (Chain not included)

    Feature

    Description

    Introductions:
    Welcome to our site! We are glad to give you a recommendation of this Go Kart Torque Converter Kit 3/4 12T 35 and 10T 40/41/420 Chain (Chain not included) . This kit is made of high quality iron and aluminum, which is sturdy and durable. It fits all engines with a 3/4 inch straight crankshaft and it’s suitable for Go Karts 30 series. With its high quality and fine workmanship, we believe that it won’t let you down. So don’t hesitate, just have a try!

    Features:
    1. Made of high quality iron and aluminum, sturdy and durable
    2. Fit all engines with a 3/4 inch straight crankshaft
    3. Suitable for Go Karts 30 series
    4. High quality and fine workmanship

    5. Easy to use Specifications:
    1. Material: Iron & Aluminum
    2. Package Dimensions: (13.78 x 13.78 x 7.48)”” / (35 x 35 x 19)cm (L x W x H)
    3. Weight: 11.24 lbs / 5.1 kg
    4. Fits: All engines with a 3/4 inch straight crankshaft
    5. 2 Sprockets Includes: 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41 Chain
    6. Fitment: Go Karts 30 Series

    Package Includes:
    1 x Go Kart Torque Converter Kit” (Chain not included)

    Conclusion

    By our suggestions above, we hope that you can found 65 Hp Torque Converter for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Previews
    Logo
    Enable registration in settings - general