Nowadays, there are so many products of usb enclosure cooling in the market and you are wondering to choose a best one.You have searched for usb enclosure cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings usb enclosure cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
784 reviews analysed
1. TDBT M.2 NVMe SSD Enclosure with Heat Sink, USB-C to PCIe NVMe M.2 SSD Enclosure with Thermal Cooling Pad, NVMe M.2 USB-C External Storage Enclosure, JMS583 Chip 10Gbps, Fits M-Key B+M Key NVMe SSD
- Supports PCIe NVMe M.2 SSD, max. speed USB 3.1 10Gbps, actual testing speed over 1000MB/s for reading/write. Save tons of time
- Dual USB-C to USB-C and USB-C to USB-A cables included, works with USB-C/Thunderbolt 3/USB-A hosts
- Enhanced heat dissipation design, SSD heat sink and thermal pad included, cooling down internal NVMe SSD rapidly
- Fits M Key and B+M Key NVMe M.2 SSD (2230/2242/2260/2280), compatible with most brands M.2 NVMe SSD
- Work with PS4/PS4 Pro/PS 4 Slim, Xbox One/One X, Windows PC/Mac/Android/, NOT work with any SSD from MacBook Pro/Air/iMac/Mac Pro
When connecting TDBT SuperC to a USB 3.1 or Thunderbolt 3 computer, you can get a read/write speed around 1000 MB/s. As a comparison, even for high-end SATA SSD, the Max. Rate is 550MB/s for reading and 450MB/s for writing.
NVMe SSD generates massive heat when working, so we enhanced the cooling system:
- Double side Copper strip on PCB to conduct heat effectively
- Specially designed SSD heat sink rapidly radiating heat from internal SSD to external Aluminum case
- Sturdy Aluminum case with heat exchange fins, practically enlarge the heat dissipation area
TDBT SuperC works with almost all brands M-Key/B&M-Key NVMe M.2 SSD. For Samsung 970 EVO plus SSD, if you want to use with Mac, update the SSD firmware is required. If you need technical support, please contact us.
To get the best performance:
- Your M.2 NVMe SSD read/write speed is faster than 1000MB/s
- Your computer has a USB 3.1 Gen2(Max. Speed 10Gbps) or Thunderbolt 3 port. For USB 3.1 Gen1 port, the max speed you get is 5Gbps only
- If you have a powerful computer, as better
- Controller chip: JMicron JMS583(PCIe 3.0×2)
- USB 3.1 Gen2 type C interface, Max. 10Gbps for M.2 NVMe SSD
- Support M-Key and B&M-Key NVMe M.2 SSD only, NOT work with M.2 SATA AHCI SSD
- Supports SSD size(mm): 22×30, 22×42, 22×60, 22×80
- Supports Max. 2TB SSD
- Compatible with USB 2.0/3.0/3.1 Gen1/3.1 Gen2/Thunderbolt 3 standard
- Work with Sony PS4/PS4 Slim/PS4 Pro, Microsoft Xbox One/One X as USB external storage. SSD formatting required, back up files before connecting
- Including 0.3M/1FT USB-C to USB-C and USB-C to USB-A data cable, compatible with USB-A/USB-C/Thunderbolt 3 ports
- System requirements: Windows 8.1/10 or later, macOS 10.10.2 or later, Android device should have USB-C port and supports OTG
2. Sabrent USB 3.0 to SATA External Hard Drive Lay-Flat Docking Station with Built-in Cooling Fan for 2.5 or 3.5in HDD, SSD [Support UASP and 6TB] (EC-DFFN)
The Sabrent ec-dffn SATA lay-flat docking station supports the direct insertion of desktop 2.5″/3.5″ Sata hard drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the Lightning speed of USB 3.0 To quickly transfer files up to 5 Gbps!
keep your drives running cool, with built-in cooling fan
The docking station features a built-in cooling fan that provides increased reliability and lifespan to HDD by keeping the drives cooler.
* supports standard desktop 2.5″”/3.5″” Sata hard drives.
* supports hard drives up to 6TB.
* on/off power switch.
* LED light indicates power and activity status.
* hot-swappable, plug and play, no drivers needed.
* reverse compatible with USB 1.1 & USB 2.0.
* transfer rates up to 5 Gbps w/USB 3.0
* transfer rates up to 480 Mbps w/USB 2.0
* available USB 3.0 for high speed data transfer
* Windows: 2000/XP/Vista/7/8 (both 32-bit & 64-bit versions)
* Mac: OS X
* Sabrent ec-dffn lay-flat docking
* power supply
* USB 3.0 cable
* user manual
3. FIDECO 3.5/2.5 Inches Hard Drive Enclosure, USB 3.0 to SATA Aluminium External HDD Case Built-in Cooling Fan Support UASP and 10TB Drives for 3.5/2.5 Inches HDD SSD
- 【Convenient External Storage】High quality aluminium hard drive case with LED indicator and power switch. Turn a 3.5”/2.5” SATA hard drive or solid state drive (with 5Gbps data transfer rate) into an external hard drive.Upgrade or back up your PC or laptop with up to 12TB hard drive capacity
- 【SupperSpeed USB 3.0 Performance】Rapid data transfer rates up to 5Gbps through the USB 3.0 port with UASP (USB Attached SCSI Protocol), supports up to 12TB capacity, provides 70% faster transfer performance and 40% faster write speeds. Backwards compatible with USB 2.0 and 1.1 connections
- 【Tool-Free Effortless Installation】It is easily and fastly to install and uninstall HDD SSD drives. Package includes two fastening pads (for secure disk positioning),USB 3.0 Gen 1 cable, compact power adapter, and simple hard drive stand (to hold the hard drive and conserve desk space).Convenienve to use and no driver or software needed
- 【Built-in Cooling Fan】It supports cooling effect function for hard enclosure and HDD SSD SATA drives, protect your hard drive from problems caused by high temperatures and extending the use of time
- 【Broad Compatibility and Service】Compatibility for Windows 2000/Windows XP/Windows Vista/Windows 7/Windows 8/Windows 10, Linux,MAC OS 10 and up. We Offer Best Service: 18 months replacement service and 24h friendly customer service and email support
Great Portability, Get the Best Out of Your Both 3.5″ and 2.5″ Hard Drive
Ideal for harnessing 3.5 “/2.5” HDD and SSD hard drive as an external USB drive, it provides a greater convenience of use and versatility of digital data storage. An ideal choice for digital lovers, movie lovers and business elites.
Super Speed 5Gbps USB 3.0 with UASP, Faster and More Efficient
The enclosure comes with the USB 3.0 connection enhanced with the UASP protocol, and significantly increases the data transfer rate, delivering up to 70% faster performance than conventional USB 3.0, quickly back up photos, video, movie, games from computer to the SATA Drive for storage.
HDD Enclosure Specification
1.Supports Windows 98/ 2000/ XP/ Vista/ 7/ 8/ 10, MAC OS 10 and up, Linux.
2.Perfect HDD Enclosure fit for 3.5″ SATA Ⅰ/Ⅱ/Ⅲ HDD SSD hard drive.
3.Rapid data transfer rates up to 5Gbps with UASP, up to 70% faster than conventional USB 3.0.
4.Strong, lightweight, heat-dissipating aluminum alloy makes firmly and securely stored to protect your precious data
5.Hot-swappable, plug and play, no drivers needed.
6. 12V/2A power adapter provides stable power supply.
1 x USB 3.0 External Hard Drive Enclosure
1 x USB 3.0 Cable
1 x 12V/2A Power Adapter
1 x Instruction Manual
4. Sabrent USB 3.0 to SATA Dual Bay External Hard Drive Docking Station with Built-in Cooling Fan for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [8TB Support] (EC-HDFN)
5. NVMe PCIe M.2 SSD to USB 3.1 Gen2 Enclosure – ElecGear NV-C01 External Aluminum Cooling Case, 10Gbps 2280 PCI-E M2 M-Key NGFF HDD Card Reader Adapter, NVMe Caddy Hard Drive Box, USB Type A and C Cable
- [NVMe Enclosure] – NV-C01 external adapter features the latest chipset of USB3.1 to PCIe Gen3 x 2 lane bridge controller. Achieving 1,000MB/s USB data transition from NVM Express PCI-e SSD to desk PC, notebook or Mac. R/W speed up to 850-1020MB/s with most NVMe hard drive. Compatible with Windows, MacOS and Thunderbolt 3 of Apple MacBook Pro and Intel NUC. Packed with two 10Gbps cables: USB 3.1 Gen2 Type-A and Type-C
- [Solid Aluminum] – Premium aluminum casing with CNC technique and thermal silicon pad design. The whole body act as a heatsink to take away the heat from memory module – No cooling fan or extra cooler needed for your expensive NVMe hard drive
- Blue LED indicator showing data status on Solid State Drive
- Easy installation, Hot-swappable, Plug & Play, No extra drive required
- [ATTENTION] – The adapter fits NVMe M.2 SSD (PCIe ‘M’ and ‘B+M’ key). It is NOT compatible with SATA NGFF, PCIe AHCI, mSATA (Mini SATA) SSD or disks pulled from Apple Mac. (*Never classify an M2 disk by its ‘KEY’ form. NVMe come in ‘M’ or ‘B+M’ key, however, most SATA NGFF also come in ‘B+M’ which is NOT supported*). Study your hard drive, make sure it is an ‘NVMe’
- [Compatibility] – Support NVMe M2 SSD with 2280, 2260, 2242, 2230 form factor: Samsung 950 Pro, PM951, PM961, PM981, SM961, 960 970 EVO Plus, 960 970 Pro, WD Black SN750 and Blue SN500, Lexar NM520, ADATA XPG SX8200, SX6000 Pro, Corsair Force MP300, MP510, Crucial P1, Sabrent, Silicon Power, Toshiba OCZ RC100, Intel Optane memory 600P, 660P, 760P, 800P, 900P, Patriot, SK Hynix, Kingston A1000, KC1000, LITEON T11 Plus, Mushkin Pilot, HP EX950, DREVO D1 XTREME
- [Target Audience] – Ultra-fast 10Gbps throughput, low latency and power efficiency. Comply with Trim, UASP and Power Saving. Perfect for tech nerds, 4K content designers and engineering. At 1000MB/s, Data copy and transferring will be done in no time
- For high-end gamers, it greatly speed up games loading on PlayStation PS4 and Xbox One console
- Insert an internal SSD in, it’s a superfast flash card reader
Compatibility Note on NV-C01:
● The adapter fits NVMe PCIe M.2 ONLY!
● NVMe come in ‘M’ or ‘B+M’ key, however, many SATA NGFF also come in ‘B+M’ which is NOT supported. You can NOT classify a ‘B+M’ disk by ‘KEY’ form. Do a research and make sure it is ‘NVMe’
● The card reader does NOT fit SATA NGFF, PCIe AHCI, mSATA or SSDs pulled from Apple Mac
● Some rare disks come in multiple editions with different interface, for example Samsung SM951 (NVMe and AHCI are available)
● Not fit AHCI disks like Samsung XP941, SM951 MZ-HPV256/512. (*SM951 MZ-VPV5120/2560 are supported for they’re NVMe)
● The caddy will heat up since NVMe produce a lot of heat
– Newest NVMe PCIe to 10Gbps USB3.1 Gen2 Adaptor
– Two 10Gbps USB Type-A and Type-C Cables included
– Premium Aluminum Case with Excellent Cooling Effort
– 2280, 2260, 2242, 2230 form factor; ‘M’ and ‘B+M’ Key
– Thermal Silicon Pad Design – Excellent Heat Dissipation
– Compatible with multi-OS: Windows 7, 8, 10 & Mac OS
– Comply with Trim, UASP, Power Saving and Plug & Play
Samsung 950 Pro, PM951, PM961, PM981, SM961, 960 970 EVO Plus Pro, WD Black SN750, ADATA XPG SX8200 and SX6000 Pro, Corsair Force MP510, Crucial P1, Sabrent Rocket, Silicon Power P34A80, Intel 600P, 660P, 760P, 900P, Patriot, SK Hynix, Kingston KC1000, Mushkin Pilot, HP EX900, EX950, Pioneer APS-SE20G, addlink S70
Kingston A1000, Corsair MP300, WD Blue SN500, Lexar NM520, Toshiba OCZ RC100, Intel Optane 800P, LITEON T11 Plus and NVMe pulled from notebook like Lenovo SL700, ST8000
1* ElecGear NV-C01 (105*45*14mm, 135gram)
1* USB A2C Cable
1* USB C2C Cable
1* PH0 Screwdriver
(Internal Memory is NOT included!)
6. RSHTECH Hard Drive Enclosure USB 3.0 to SATA External Hard Drive Docking Station for 3.5 inch SATA I/II/III HDD SSD Up to 10TB Support UASP (Black)
- Compatibility: Support all 3.5 inch SATA I/II/III external hard disk up to 10 TB. Compatible with Windows 2000/XP/ VISTA/ Windows 7/ 8 /10/ Linux/ Mac 9.0 or above.
- Hard Drive Caddy with super speed: The 3.5” HDD caddy packed with USB 3.0 cable supports super speed data transfer rates at 6Gbps, UASP supported.
- Multipurpose Plug and Play HDD SSD Dock: It is a reliable portable hard drive case for work from home or at the office, also an ideal HDD dock to expand extra external storage for smart TV, PS4 and PS4 Pro, Xbox one, Xbox one x and Nintendo Switch, etc.
- Multiple Protection：The most advanced ASM1153e master chip with lower power consumption, a 12V 2A power supply provides more stable transmission, short circuits and leakage protection say no to data loss.
- Easy Installation in 3 minutes: Slide off the case cover, put in your HDD or SSD, use the screwdriver and screws in the package to fix it for a better protection, slide the cover back and done.
The RSHTECH Lay Flat SATA HDD/SSD Enclosure supports the direct insertion of connecting to 3.5″ SATA Hard Drives. Using the most advanced ASM1153e chipset, which is the best you can get in the market!
Switch Design: Light press to turn on, long press 3 seconds to turn off power supply. Effectively protect the hard disk from damaging.
Hot-swappable: Plug and play, no drivers needed;
The SATA interface of the drive enclosure supports UASP accelerated transmission protocol (UASP requires UASP capable host system).
Made of safe and high quality ABS plastic makes this enclosure solid and sturdy.
If it happens the situation which the hard disk does not allow access，and we are providing the following suggestions:
1. You can use the other computer to see if this will happen;
2. If it is used for desktop computers, then the USB3.0 cable must be plugged in the host behind the computer interface.
1x 2.5/3.5 Inch SATA Hard Drive Enclosure
1x 12V/2A Power Adapter
4x Fixed Hard Drive Screws
1x USB 3.0 Data Cable
1x Instruction Manual
– The bottom of the hard disk case is provided with a fixed 3.5 inch hard disk screw hole, and the hard disk is inserted more firmly and is more convenient to carry.
– If you need to install a 2.5″ hard drive（the screw holes will not line up on the 2.5″ hard drive）, maybe need to use something to fixed it in place. (Such as: tape)
– In order to avoid data loss, please click “Safely Remove Hardware” icon on your PC first then unplug it.
-Do not connect the enclosure to the USB port on the front panel of the desktop computer. The port on the front panel may have the insufficient power supply and cause disconnection frequently.
– LED light on the top indicates Power and Activity status.
– One-Year limited warranty.
7. ineo M.2 NVMe (PCIe) SSD Enclosure Built-in Cooling Fan and Write Protection Switch [C2598-NVMe]
- Built with write-protection switch which is useful for keeping the contents of your SSD safe from malware when you need to view them on a public computer. Move it to the “Lock” position. This action effectively sets all files, and the device itself for read-only mode.
- Built-in silent fan for positive heat dissipation, 3.3V 6000 RPM, smart active when temperature is over 45 degree centigrade
- Ultra fast 10Gbps USB 3.2 Gen2 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
- Bundled with silicone thermal pad for better cooling down during high speed transfer
- ★★Only for M.2 NVMe / PCle SSD, Not support NGFF / SATA SSD / Micron M.2 SSD.★★
ineo believes protection is never enough for your precious data in your M.2 NVMe SSD, so we introduce a best cooling enclosure 2598NVMe with transfer in USB 3.2 Gen 2 10Gbps ultra fast speed.
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 3.3V 6000 RPM, smart active when temperature is over 45 degree centigrade
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X
1 x ineo C2598 Rugged Aluminum M.2 NVMe SSD Enclosure
1 x Screws Kit
1 x Silicone Thermal Pad
1 x User Manual
1 x Guarantee Card
Internal Interface：M.2 M-Key
External Interface：USB3.1 Gen2 Type-C
Support SSD：M.2 NVMe SSD
Transfer Speed：USB3.1 Gen 2 10Gbps(Theoretic)
Product material：Aluminum alloy + stainless steel
Cable length：24cm/9.44 inches
Adapter：USB Type-A to C adapter
8. Vantec NexStar TX 3.5" USB 3.0 Hard Drive Enclosure (NST-328S3-BK)
- Adopt UASP to enhance maximum performance for latest Windows OS
- No drivers needed (NDN) for Windows OS and OSx
- SuperSpeed USB 3.0 transfer rates of up to 5Gbps, backward compatible with USB 2.0/1.1
- Converts 3.5” SATA HDD/SSD into an external Hard Drive for ultimate mobility and convenience
- Flexibility to put your own hard drive. (Hard drive not included in package)
Nexstar TX 3.5″ SATA 6GB/s to USB 3.0 HDD enclosure
9. RSHTECH Hard Drive Enclosure USB 3.0 to SATA Aluminum External Hard Drive Dock Case for 3.5 inch HDD SSD up to 10TB Drives [Support UASP]
- Broad Compatibility : Support 3.5 inch SATA I/II/III /HDD SSD up to 12 TB hard drives. Compatible with Windows 2000/XP/ VISTA/ Windows 7/ 8 /10/ Linux/ Mac 9.0 or above, PS4 , PS4 Pro, Xbox 360 and Xbox one.
- Automatic Sleep Function: Entering sleep mode after 10 minutes of data access inactivity. Electronic power button, long press 3 seconds to turn it off, effective protection of your hard drive disk. Two LED indicator show power status ( Red ) and hard drive activity status (Blue )
- Plug and Play: The external hard drive case with independent 12V/ 2A power supply using ASM1153e master chip makes lower power consumption, more stable transmission, multiple protection for your 3.5” hard drive. integrated safeguards prevent over voltage, leak currents, short circuits and peak voltage, guaranteed safer data transfer and access hard drive. integrated safeguards prevent over voltage, leak currents, short circuits and peak voltage, guaranteed safer data transfer and access
- 6Gbps Data Transfer Rates : High-Speed USB 3.0 data transfer cable support for SATA I/II/III SSD and HDD, UASP (USB Attached SCSI Protocol) support.
- Better Cooling 3.5 enclosure: Aluminum case with vents in the bottom, you can dock the HDD enclosure in the ABS bracket vertically to get better cooling performance.
By our suggestions above, we hope that you can found Usb Enclosure Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!